LC/MS interfaces: Difference between revisions
From Mass Spec Terms
Created page with 'It has been suggested by several ASMS members that there are three ways to make a spray or aerosol for LC/MS: with a gas, heat, or electricity. Hence the terms: (1) aerospray;…' |
(No difference)
|
Revision as of 22:03, 19 July 2009
It has been suggested by several ASMS members that there are three ways to make a spray or aerosol for LC/MS: with a gas, heat, or electricity. Hence the terms: (1) aerospray; (2) thermospray; and (3) electrospray. Under this model:
MAGIC - aerospray Particle Beam - aerospray Thermobeam - aero-thermospray ion spray - aero-electrospray
All this may be a bit "extreme", since it does not closely follow what is in the literature, and excludes APCI. However, this whole issue should be addressed, and a few terms settled on.
