Microelectrospray: Difference between revisions

Latest revision as of 22:36, 17 March 2024

Microelectrospray
IUPAC RECOMMENDATIONS 2013
Electrospray ionization at a low solvent flow rate, typically several microliters per minute or lower, where a pump is used to provide the sample flow.
Related Term(s): nanoelectrospray
Reference(s): M. R. Emmett, P. E. Andren, R. M. Caprioli. J. Neurosci. Meth. 62, 141 (1995). (http://dx.doi.org/10.1016/0165-0270(95)00070-4 ) PSI-MS: MS:1000397
From Definitions of Terms Relating to Mass Spectrometry (IUPAC Recommendations 2013); DOI: 10.1351/PAC-REC-06-04-06 © IUPAC 2013.
Index of Recommended Terms

@@ Line 1: / Line 1: @@
-{{DefName|
+{{Final
-This term is used to describe the [[electrospray]] interface which achieves a reduction in the sample flow rates (less than 1 &mu;L/min). The reduced flow rate is due to a narrower inner diameter of the needle tip (usually less than 50 &mu;m) and is maintained mechanically. See also [[electrospray ionization]] and [[nanoelectrospray]].
+|acronym=
+|def=[[Electrospray ionization]] at a low solvent flow rate, typically several microliters per minute or lower, where a pump is used to provide the sample flow.
+|rel=[[nanoelectrospray]]
+|ref=:M. R. Emmett, P. E. Andren, R. M. Caprioli. J. Neurosci. Meth. 62, 141 (1995). (http://dx.doi.org/10.1016/0165-0270(95)00070-4 )
+{{psims|1000397}}
 }}
-== Related Terms ==
-[[Electrospray]]
+[[category:ionization]]
-[[Nanospray]]
-[[Category:Ionization]]