Microelectrospray: Difference between revisions

Revision as of 01:40, 26 December 2005

Microelectrospray
DRAFT DEFINITION
Electrospray ionization at a solvent flow rate less than 1 μL/min.
Considered between 2004 and 2006 but not included in the 2006 PAC submission
This is an unofficial draft definition presented for information and comment. Recommended terms \| Full list of terms

@@ Line 1: / Line 1: @@
 {{DefName|
-This term is used to describe the [[electrospray]] interface which achieves a reduction in the sample flow rates (less than 1 &mu;L/min). The reduced flow rate is due to a narrower inner diameter of the needle tip (usually less than 50 &mu;m) and is maintained mechanically. See also [[electrospray ionization]] and [[nanoelectrospray]].
+[[Electrospray]] ionization at a solvent flow rate less than 1 &mu;L/min.
 }}
 == Related Terms ==