Microelectrospray
From Mass Spec Terms
| DRAFT DEFINITION |
| Microelectrospray |
|---|
|
This term is used to describe the electrospray interface which achieves a reduction in the sample flow rates (less than 1 μL/min). The reduced flow rate is due to a narrower inner diameter of the needle tip (usually less than 50 μm) and is maintained mechanically. See also electrospray ionization and nanoelectrospray. |
| Considered between 2004 and 2006 but not included in the 2006 PAC submission |
| This is an unofficial draft definition presented for information and comment. |
